Anti-Slip Commercial 

ANTI SLIP TILE & SAFETY TREATMENT

ANTI SLIP DOMESTIC

Safety Treatment for Ceramic Tile, Quarry Tile, Terrazzo and unpainted concrete.

 

WHAT IS ANTI SLIP COMMERCIAL

Anti Slip Commercial is a fluoride based liquid safety treatment designed to control slipping on tiled and concrete floors - particularly when water is present.

 

WHY COMMERCIAL

Anti Slip "commercial formulation" has been used industrially for almost 25 years, for experienced applicators Commercial Anti-slip is perfect for 1 coat applications as it is an industrial strength application.

 

HOW DOES IT WORK?

Anti Slip Commercial creates a minute change in the surface texture of the floor with little or NO change in appearance but providing an improvement in slip-resistance of up to 80%.

Please note a surface texture change or damage can occur if not applied correctly or a test area carried out to ensure no damage is done to the tiles 

 

HOW LONG WILL IT LAST?

The floor surface will have to be worn down to affect the Anti Slip Treatment. It is not a coating which will peel off.

 

HOW DO YOU MAINTAIN THE FLOOR AFTER TREATMENT?

Normal regular cleaning is all that is required. A build up of dirt, grease or soap residue can temporarily affect the performance, however a good detergent clean will restore the floor's Anti Slip qualities.

 

HOW IS ANTI SLIP APPLIED?

Anti Slip is poured undiluted into a bucket or pail and applied by mop, broom, brush, or squeegee directly onto the floor in three equal applications. Allow a few minutes between applications. Do not allow the surface to dry. After the final application thoroughly rinse the surface with water. Mop or squeegee dry if required. The Anti Slip effect will be immediately apparent. The cleaning effect will be obvious. The floor can be walked on immediately.

 

For a video on the application of Ant-Slip Domestic for Tiles, please view here

 

HOW SAFE IS ANTI SLIP?

Anti Slip is environmentally friendly. Those with sensitive skin should wear gloves, however no other safety precautions are required.

 

WHERE CAN I USE ANTI SLIP?

Anti Slip can be used in a range of locations around the house where there is concern for slip/fall accidents. Typical applications include pool surrounds, patios, bathrooms, laundries, steps, kitchens, and entry foyers. The product may be used internally or externally and is not affected by ultraviolet rays.

 

WHICH FLOORS CAN BE TREATED WITH ANTI SLIP?

Anti Slip is designed for use on ceramic tiles, including glazed and mosaic tiles, quarry tiles, terrazzo, and unpainted or unsealed concrete.